FAS-W Humidity Analyzer

FAS-W humidity analyzer is an automatic condensation hygrometer designed for measuring volume ratio of moisture in gas and dew point temperature under pressure up to 10 MPa.

The analyzer comes with an absolute gas pressure sensor and can recalculate the dew point into the moisture volume ratio.

The measured and calculated humidity values can be communicated to the upper level via both current (4…20 mA) and digital output RS-485 (Modbus protocol).

Description

Fields of Application

  • gas conditioning
  • metallurgy
  • mechanical engineering
  • chemical and petrochemical industry
  • microelectronics
  • energy industry

Intended use

  • Measuring moisture content in inert and aggressive gases, including water-containing ones.
  • The analyzer can be used in the processes of gas conditioning, metallurgy, mechanical engineering, chemical and petrochemical industry, microelectronics, energy industry.

Signature Features

  1. Expanded measurement range
    Expanded measurement range for dew point temperatue from −80°C to +65°C
  2. Current output of dew point in °C, °F, °K
    Current output of dew point in °C, °F, °K or calculated value of moisture volume ratio in ppmV or mg / m3
  3. Increased sensitivity of the optic system
    Increased sensitivity of the optic registration system to the water vapor condensation
  4. Separate input for the pressure sensor
  5. Explosion-proofing degree 1 Ex d IIC T5 X
  6. Installation of the device on pipelines or in various gas conditioning systems
  7. Various front-end interfaces

    Front-end interfaces:

    • digital RS-485
    • current 4…20mA
    • two «Alarm»-type signal channels